S.M.G THINSET
SMG thinset is a one part, self-bonding, tough, non-shrink, cement based grout, with excellent adhesive properties. It bonds to old or new concrete.
Recommended for:
Old or new concrete
Sanded and um-sanded grout applications
Wall - porcelain, ceramic. Marble, clay
Floor tiles - Granite, Porcelain, Ceramic, Marble, Clay and Vinyl
Concrete masonry, brick, poured concrete, Portland Cement plaster surfaces.
Foam glass, gypsum board, marble, expanded polyethylene surfaces
Old tiled surfaces
Laying all types of tiles including marble, porcelain, ceramic, granite concrete etc.Features:
Easy to mix
Manufactured to rigorous Quality Control Standards and ASTM specifications
Can be used on a wide range of surfaces
Tiles do not need to be pre-soaked q High bond strength
Suitable for use on vertical and horizontal surfaces
Packaging:
5 lb Bags q 50 lb bags, each of which will cover 100 sq. ft. @ 1/8 inch thick, 60 sq. ft. @ ¼ inch thick
Technical Data:
At a constant percent of water, consistency will vary with temperature. Final set time takes place in approximately 5-7 hours at a floatable consistency, 70 degree F (21 degrees C) as tested by ASTM standards. Compressive Strength - 1250-PSI minimum - 7 days as tested by ASTM Shear Bond - 150-PSI minimum - 7 days.
Site design and all content © 2002 Harricrete Ltd., Trinidad & Tobago,
W.I.
Company email addresses
& full contact information here.
Site by Webworks.
Legal Notice
