Boncrete
| Boncrete is used as an economical bonding adhesive and cement admixture in all construction works. Bondcrete will key plaster, bond / renderings, floor screeds, terrazzo / strips, seal surfaces and repair concrete whether new or old. It can be used to increase the strength of concrete mixtures while accelerating the set times; in addition, the effects of moisture or dampness does not alter the performance of the adhesive. Bondcrete also performs well in acidic, alkali and saline conditions. |  |
Applications:
As a bonding agent of similar or dissimilar porous materials, Bondcrete can be applied directly.
As a primer or sealant on porous surfaces of concrete, hardboard, asbestos etc. Bondcrete can be diluted at a ratio of 1 part Bondcrete to 3 -6 parts of water.
For bonding, and as an admixture in concrete or mortar. Bondcrete can be diluted with 3 parts to 6 parts of water. This mixture can be brushed unto old concrete, brickwork or floors for the application of new renderings or concrete; or the mixture can be mixed into the cement mixture to increase strengths and bonding to other surfaces. When diluted 1 part of Bondcrete to 4 parts of water and used as gauging water in normal sand / cement mixtures, a perfect adhesive is achieved.
Boncrete is supplied in a 1 Gallon Container which, when applied directly to the surface will cover approximately 80-100 sq.ft.
Technical Data:
Site design and all content © 2002 Harricrete Ltd., Trinidad & Tobago,
W.I.
Company email addresses
& full contact information here.
Site by Webworks.
Legal Notice
