High Temperature Non-shrink Grout

Harricrete Heat Resistance Grout is a cement-based, nonmetallic non-shrink grout used for in high temperature conditions. When tested in accordance with ASTM C 827 Harricrete Heat Resistant Grout shows positive expansion. The grout meets performance requirement of ASTM C 1107 and CRD-C 621 specifications for non-shrink grout.

Recommended for:

Grouting of baseplates in high operating temperatures
Non-shrink grouting subject to high temperature of structural steel
Installation of anchors and dowels
Repair of concrete in confined areas

Features:

High strength at temperatures up to 20000F
98% effective bearing area (EBA) is typically achieved following proper grouting procedures
Locally manufactured under strict quality
Formulated with Devoider for optimum load transfer
Does not contain aluminum powder
Permanent support for machinery

Packaging:

Packaged in heavy duty, polyethylene lined bags containing 100lbs. (45.4 kg)

Coverage:

100lbs covers 0.090 cubic feet

Typical properties at 90'F (32'C)

Early height change, ASTM C 827	0.0 - 2.0%
Hardened Height Change, ASTM C 1090	0.0 - 2.0%
Effective Bearing Area	95% minimum
Compressive Strength, ASTM C 109
1 Day	4,500 -6,000 psi
7 Days	8,000 - 10,000 psi
28 Days	10,000 - 11,000 psi

 

 

top

Site design and all content © 2002 Harricrete Ltd., Trinidad & Tobago, W.I.
Company email addresses & full contact information here. Site by Webworks.
Legal Notice